National Item Identification Number
00-660-1496
006601496
5365-00-660-1496
5365006601496
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Referenced on: http://www.tpub.com/content/boats/TM-5-2010-205-24P/TM-5-2010-205-24P0170.htm
Referenced on: http://www.tpub.com/content/boats/TM-5-2010-205-24P/TM-5-2010-205-24P0178.htm
Referenced on: http://www.tpub.com/content/boats/TM-5-2010-205-24P/TM-5-2010-205-24P0219.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-233-23P/TM-5-2410-233-23P0778.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-233-23P/TM-5-2410-233-23P0815.htmDescription
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
60038
THE TIMKEN CORPORATION
1835 DUEBER AVE SW
CANTON
OH
44706
603-443-5282
24446
97993
GENERAL DYNAMICS DEFENSE SYSTEMS
INC.
100 PLASTICS AVE.
PITTSFIELD
MA
01201
413-494-2849
NSN (National Stock Number) 5365-00-660-1496, 5365006601496 NIIN (National Identification Number) 00-660-1496, 006601496
Part Numbers (Reference Numbers)
K22005
SMTF3
102B5370-1REVA
102B5370-1REVA
31D24
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
CONSTRUCTION;
Required Description
ALUMINUM ALLOY 3003
QQ-A-250/2,H14 FED SPEC SINGLE MATERIAL RESPONSE
ANODIZE;