National Item Identification Number
12-174-8311
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-668-23P/css/TM-9-6115-668-23P_18.htm
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-668-23P/css/TM-9-6115-668-23P_190.htm
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-668-23P/css/TM-9-6115-668-23P_21.htm
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-668-23P/css/TM-9-6115-668-23P_249.htm
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-668-23P/css/TM-9-6115-668-23P_262.htm
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-668-23P/css/TM-9-6115-668-23P_277.htm
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-668-23P/css/TM-9-6115-668-23P_400.htm
Referenced on: http://dieselgenerators.tpub.com//TM-9-6115-668-23P/css/TM-9-6115-668-23P_428.htm
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_361.htm
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_369.htm
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_421.htm
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_489.htm
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_497.htm
Referenced on: http://generators.tpub.com//TM-9-6115-669-13P/css/TM-9-6115-669-13P_532.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
H2294
THALES OPTRONICS BV
DBA THALES OPTRONICS
LAAN VAN YPENBURG 108
24045
'S-GRAVENHAGE
2497 GC
NETHERLANDS
070-4145800
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
H6077
MAFO HOLTKAMP B.V.
WIERDENSESTRAAT 226
212
ALMELO
7604 BS
NETHERLANDS
0546-575360
H6077
MAFO HOLTKAMP B.V.
WIERDENSESTRAAT 226
212
ALMELO
7604 BS
NETHERLANDS
0546-575360
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
D8286
DIN DEUTSCHES INSTITUT FUER NORMUNG
EV
BURGGRAFENSTR. 6
BERLIN
10787
GERMANY
030-2601-0
C0628
C2463
OERLIKON CONTRAVES GMBH
1363
STOCKACH
GERMANY
07771-81-0
S3092
OERLIKON CONTRAVES AG
BIRCHSTRASSE 155
ZUERICH
SWITZERLAND
4113162211
D0350
AESCULAP AG & CO. KG
MEDIZINTECHNIK
40
TUTTLINGEN
GERMANY
07461-95-0
NSN (National Stock Number) 5310-12-174-8311, 5310121748311 NIIN (National Identification Number) 12-174-8311, 121748311
Part Numbers (Reference Numbers)
A533 9004A
A6-4DIN125A4
A6,4DIN125-A4-70
C940950 POS 30
C940951 POS 30
DIN1
Required Categories
Required Description