National Item Identification Number
01-376-2886
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-673-24P/0788650504.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-673-24P/0788650516.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1L965
LORD CORP
INDUSTRIAL PRODUCTS DIV
124 GRANT ST
CAMBRIDGE SPRINGS
PA
16403
814-398-4641
76005
1YHH8
JLG INDUSTRIES INC
1 JLG DR
MC CONNELLSBURG
PA
17233
262-268-8997
NSN (National Stock Number) 5310-01-376-2886, 5310013762886 NIIN (National Identification Number) 01-376-2886, 013762886
Part Numbers (Reference Numbers)
J-2049-69
J-2049-69
7054351
7054351
Required Categories
MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
HOLE
Required Description
STEEL OVERALL
ZINC OVERALL
QQ-Z-325,TYPE I,CLASS 3 FED SPEC SINGLE TREATMENT R