National Item Identification Number
01-224-9108
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-254-24P/css/TM-9-2815-254-24P_105.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-254-24P/css/TM-9-2815-254-24P_76.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-254-24P/css/TM-9-2815-254-24P_84.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-254-24P/css/TM-9-2815-254-24P_94.htm
Referenced on: http://automotiveenginemechanics.tpub.com//TM-9-2815-254-24P/css/TM-9-2815-254-24P_95.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-657-24P/css/TM-10-3930-657-24P_200.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-657-24P/css/TM-10-3930-657-24P_230.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-657-24P/css/TM-10-3930-657-24P_250.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-658-24P/TM-10-3930-658-24P0191.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-658-24P/TM-10-3930-658-24P0222.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-658-24P/TM-10-3930-658-24P0242.htm
Referenced on: http://generators.tpub.com//TB-11-6115-741-24/TB-11-6115-741-240092.htm
Referenced on: http://generators.tpub.com//TB-11-6115-741-24/TB-11-6115-741-240096.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
K4733
HYSTER EUROPE LTD
FLAGSHIP HOUSE READING ROAD NORTH
FLEET
GU51 4WD
UNITED KINGDOM
01252 810261
04627
NACCO MATERIALS HANDLING GROUP INC
DBA HYSTER COMPANY
1010 E FAIRCHILD ST
DANVILLE
IL
61832
217-443-7416
30076
NACCO MATERIALS HANDLING GROUP INC.
DBA HYSTER COMPANY
1400 SULLIVAN DRIVE
GREENVILLE
NC
27834
248-924-2640
S0226
ISUZU MOTOR CO. LTD
22-10 MINAMI-OI
6 CHOME SHINAGAWA-KU
TOKYO
JAPAN
Z0X96
ISUSZU-GENERAL MOTORS AUST LTD
858 LORIMER ST
PORT MELBOURNE
3207
AUSTRALIA
03-96446666
Z0718
HYSTER ASIA PACIFIC
1 BULLECOURT AVE
MILPERRA
2214
AUSTRALIA
Z5394
LAND ROVER AUSTRALIA PTY LTD
75 ANNANDALE RD
LB2214
TULLAMARINE
3043
AUSTRALIA
1800818620
Reference Numbers (Part Numbers)
324412
324412
324412
9095714080
9095714080
9095714080
9095714080
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
COPPER OVERALL
8.14 MILLIMETERS NOMINAL
1 ROUND
13.8 MILLIMETERS NOMINAL
1 R