National Item Identification Number
01-160-4548
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://waterstorage.tpub.com//TM-5-3825-225-14P/css/TM-5-3825-225-14P_340.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-225-14P/css/TM-5-3825-225-14P_365.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-225-14P/css/TM-5-3825-225-14P_389.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
13446
PERKINS ENGINES INC
26200 TOWN CENTER DR STE 280
610
MOSSVILLE
IL
61552
309-578-7364
Reference Numbers (Part Numbers)
36151507
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HARDNESS RATING
HOLE DIAMETER;
Required Description
STEEL OVERALL
BS.1449 EN 2B,FSCM 13446 MFR REF SINGLE MATERIAL RESPONSE OVERALL