National Item Identification Number
01-117-6266
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://receiversets.tpub.com//TM-11-5895-1110-24P/TM-11-5895-1110-24P0193.htm
Referenced on: http://receiversets.tpub.com//TM-11-5895-1110-24P/TM-11-5895-1110-24P0205.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
56996
DEPARTMENT OF THE ARMY HQ
UNITED STATES ARMY COMMUNICATIONS
12 WD BLDG 601
MCAFEECENTER
FORT MONMOUTH
NJ
07703
732-532-9735
NSN (National Stock Number) 5310-01-117-6266, 5310011176266 NIIN (National Identification Number) 01-117-6266, 011176266
Part Numbers (Reference Numbers)
B4003366-1
Required Categories
MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
HOLE
Required Description
STEEL COMP 1018 OVERALL
TIN OVERALL
MIL-T-10727,TY 1 MIL SPEC SINGLE TREATMENT