National Item Identification Number
01-102-1881
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
57386
C-WAY INDUSTRIES INC
300-100 EAGLE DR
WINNIPEG
R2R 1V5
CANADA
204-633-1999
81860
57386
C-WAY INDUSTRIES INC
300-100 EAGLE DR
WINNIPEG
R2R 1V5
CANADA
204-633-1999
30003
98752
Reference Numbers (Part Numbers)
A04100086
R18733-7
04100086
1378AS184-1
8227046-01
Required Categories
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE SHAPE STYLE
Required Description
0.375 INCHES NOMINAL
1 ROUND
1.750 INCHES NOMINAL
1 ROUND
1 RECTANGULAR
0.0