National Item Identification Number
01-007-6898
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://multiplexers.tpub.com//TM-11-5805-638-34P/TM-11-5805-638-34P0038.htm
Referenced on: http://multiplexers.tpub.com//TM-11-5805-638-34P/TM-11-5805-638-34P0044.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
08289
THE DELBERT BLINN CO INC
4460 BROOKS ST STE A
MONTCLAIR
CA
91763
909-621-0200
15280
NSN (National Stock Number) 5310-01-007-6898, 5310010076898 NIIN (National Identification Number) 01-007-6898, 010076898
Part Numbers (Reference Numbers)
MW750-255-002
MW750-255-002
Required Categories
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE SHAPE STYLE
Required Description
0.250 INCHES NOMINAL
1 ROUND
0.750 INCHES NOMINAL
1 ROUND
1 RECTANGULAR
082