National Item Identification Number
01-005-2300
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
27773
BUNTING BEARINGS CORP
DELTA PLANT
1952 VAN BUREN ST
37
DELTA
OH
43515
419-822-3456
71366
BUNTING BEARINGS CORP
1001 HOLLAND PARK BLVD
729
HOLLAND
OH
43528
419-866-7000
Reference Numbers (Part Numbers)
BC1116
BC1116
FF-W-92
172010PC87
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
STEEL OVERALL
0.375 INCHES NOMINAL
1 ROUND
2.000 INCHES NOMINAL
1 ROUND
1 R