National Item Identification Number
00-792-4674
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-607-24P/css/TM-10-3930-607-24P_217.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-607-24P/css/TM-10-3930-607-24P_230.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-607-24P/css/TM-10-3930-607-24P_254.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-20P/TM-10-3930-623-20P0023.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-20P/TM-10-3930-623-20P0162.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-20P/TM-10-3930-623-20P0167.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-34P/TM-10-3930-623-34P0033.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-34P/TM-10-3930-623-34P0217.htm
Referenced on: http://constructionforklifts.tpub.com//TM-10-3930-623-34P/TM-10-3930-623-34P0226.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-10-3950-206-20P/TM-10-3950-206-20P0017.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-10-3950-206-20P/TM-10-3950-206-20P0160.htm
Referenced on: http://www.tpub.com/content/misc_manuals_1/TM-10-3950-206-20P/TM-10-3950-206-20P0169.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
02978
L-3 COMMUNICATIONS CORPORATION
DBA COMBAT PROPULSION SYSTEMS
76 S GETTY ST
MUSKEGON
MI
49442
231-724-2631
63728
SEALCRAFT CORPORATION
418 WELLSTON CIR
WALTERBORO
SC
29488
843-538-2324
04627
NACCO MATERIALS HANDLING GROUP INC
DBA HYSTER COMPANY
1010 E FAIRCHILD ST
DANVILLE
IL
61832
217-443-7416
30076
NACCO MATERIALS HANDLING GROUP INC.
DBA HYSTER COMPANY
1400 SULLIVAN DRIVE
GREENVILLE
NC
27834
248-924-2640
0AHU0
96046
CRANE PUMPS & SYSTEMS INC
420 3RD ST
PIQUA
OH
45356
937-615-3553
NSN (National Stock Number) 5310-00-792-4674, 5310007924674 NIIN (National Identification Number) 00-792-4674, 007924674
Part Numbers (Reference Numbers)
X14395
X14395
109245
109245
4908717-4
50528
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
PLASTIC POLYHEXAMETHYLENE AMIDE OVERALL
MIL-M-20693,TYPE 1 MIL SPEC SINGLE MATE