National Item Identification Number
00-515-8243
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/elecgentestequip/TM-11-6625-2709-40P/TM-11-6625-2709-40P0019.htm
Referenced on: http://www.tpub.com/content/elecgentestequip/TM-11-6625-2709-40P/TM-11-6625-2709-40P0038.htm
Referenced on: http://radiosets.tpub.com//TM-11-5820-785-24P/TM-11-5820-785-24P0080.htm
Referenced on: http://radiosets.tpub.com//TM-11-5820-785-24P/TM-11-5820-785-24P0179.htm
Referenced on: http://radiosets.tpub.com//TM-11-5820-785-24P/TM-11-5820-785-24P0222.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0097.htm
Referenced on: http://radiosets.tpub.com//TM-11-5821-248-34P/TM-11-5821-248-34P0198.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
D9182
56232
D9182
3B150
49956
96214
D9182
74684
HUGHES CHRISTENSEN CO
HUGHES DRILLING EQUIPMENT DIV
17015 ALDINE-WESTFIELD RD
60945
HOUSTON
TX
77205
281-363-6224
82577
NSN (National Stock Number) 5310-00-515-8243, 5310005158243 NIIN (National Identification Number) 00-515-8243, 005158243
Part Numbers (Reference Numbers)
0126006-2
0188-07
17600-2
236M0022P009
236M0022P009
26216437
30723
310-00
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL COMP 302 OVERALL
MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PA