National Item Identification Number
00-037-4935
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://clothingandindividualequipment.tpub.com//TM-10-4510-206-24P/TM-10-4510-206-24P0062.htm
Referenced on: http://clothingandindividualequipment.tpub.com//TM-10-4510-206-24P/TM-10-4510-206-24P0069.htm
Referenced on: http://clothingandindividualequipment.tpub.com//TM-10-4510-206-24P/TM-10-4510-206-24P0083.htm
Referenced on: http://constructionmixers.tpub.com//TM-5-3895-342-34P/TM-5-3895-342-34P0078.htm
Referenced on: http://constructionmixers.tpub.com//TM-5-3895-342-34P/TM-5-3895-342-34P0163.htm
Referenced on: http://constructionmixers.tpub.com//TM-5-3895-342-34P/TM-5-3895-342-34P0179.htm
Referenced on: http://heaters.tpub.com//TM-10-4520-259-13P/css/TM-10-4520-259-13P_226.htm
Referenced on: http://heaters.tpub.com//TM-10-4520-259-13P/css/TM-10-4520-259-13P_230.htm
Referenced on: http://heaters.tpub.com//TM-10-4520-259-13P/css/TM-10-4520-259-13P_235.htm
Referenced on: http://waterdecontamination.tpub.com//TM-9-4940-342-14P/css/TM-9-4940-342-14P_106.htm
Referenced on: http://waterdecontamination.tpub.com//TM-9-4940-342-14P/css/TM-9-4940-342-14P_155.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-221-24P/css/TM-5-3825-221-24P_170.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-221-24P/css/TM-5-3825-221-24P_197.htm
Referenced on: http://waterstorage.tpub.com//TM-5-3825-221-24P/css/TM-5-3825-221-24P_207.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
91265
PARKER HANNIFIN CORPORATION
DIV ENGINEERED SEAL DIVISION
1525 S 10TH ST
GOSHEN
IN
46526
574-457-3141
82796
1Y370
SUNTEC INDUSTRIES INC DEL
DBA SUNTEC
2210 HARRISON AVE
ROCKFORD
IL
61104
815-226-3700
17624
ASPHALT EQUIPMENT CO INC
13333 U S HWY 24 W
FORT WAYNE
IN
46804
219-672-3422
70142
AEROIL PRODUCTS CO INC
70 GRAND AVE SUITE 1
RIVER EDGE
NJ
07661
201-343-5200
70142
AEROIL PRODUCTS CO INC
70 GRAND AVE SUITE 1
RIVER EDGE
NJ
07661
201-343-5200
45934
ONTIC ENGINEERING & MANUFACTURING
INC
20360 PLUMMER ST
CHATSWORTH
CA
91311
818-725-2127
56705
DONALLCO INC
7240 COLDWATER CANYON AVE
3944
NORTH HOLLYWOOD
CA
91609
213-875-0550
NSN (National Stock Number) 5310-00-037-4935, 5310000374935 NIIN (National Identification Number) 00-037-4935, 000374935
Part Numbers (Reference Numbers)
G309C0MP0UND1183
H2473
25815
25815
25815
25815P
74125-21
74145-21
99-112
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HOLE DIAMETER
PERIPHERAL SHAPE
Required Description
CELLULOSE OVERALL
MIL-A-7021 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
1.125 I