National Item Identification Number
00-347-0021
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructiondumptrucks.tpub.com//TM-5-3805-264-14P/css/TM-5-3805-264-14P_335.htm
Referenced on: http://constructiondumptrucks.tpub.com//TM-5-3805-264-14P/css/TM-5-3805-264-14P_342.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-224-24P-1/css/TM-5-2420-224-24P-1_787.htm
Referenced on: http://trucktractor6x4.tpub.com//TM-9-2320-363-24P/css/TM-9-2320-363-24P_1103.htm
Referenced on: http://trucktractor6x4.tpub.com//TM-9-2320-363-24P/css/TM-9-2320-363-24P_1121.htm
Referenced on: http://trucktractor6x4.tpub.com//TM-9-2320-363-24P/css/TM-9-2320-363-24P_942.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
64678
99321
77445
79805
ACCO-BABCOCK INC
HOIST AND CRANE DIV
76 ACCO DR
792
YORK
PA
17405
717-741-4863
1VN02
AIRDALE EXPRESS LLC
502 STARKSTONE CT
SPRING
TX
77386
281-419-9444
NSN (National Stock Number) 5310-00-347-0021, 5310003470021 NIIN (National Identification Number) 00-347-0021, 003470021
Part Numbers (Reference Numbers)
23-11670-25
3507
361226
361226
40233
40233ADX
Required Categories
MATERIAL
SURFACE TREATMENT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
HOLE
Required Description
STEEL OVERALL
CADMIUM OVERALL
QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RES