National Item Identification Number
00-298-3880
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://www.tpub.com/content/amplifiers/TM-9-6625-2150-34P/css/TM-9-6625-2150-34P_76.htm
Referenced on: http://www.tpub.com/content/amplifiers/TM-9-6625-2150-34P/css/TM-9-6625-2150-34P_94.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
93953
MELSTROM MFG CORP.
5303 ASBURY ROAD
FARMINGDALE
NJ
07727
732-938-7400
71400
COOPER BUSSMANN INC
BUSSMANN DIV
114 OLD STATE RD
BALLWIN
MO
63021
636-394-2877
Reference Numbers (Part Numbers)
BP114084
9732
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
RUBBER SYNTHETIC OVERALL
0.500 INCHES NOMINAL
1 ROUND
0.688 INCHES NOMINAL
1