National Item Identification Number
00-298-0772
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
1LW55
REMY INTERNATIONAL INC
2902 ENTERPRISE DR
ANDERSON
IN
46013
765-778-6889
24617
61928
GENERAL MOTORS CORP
AC-DELCO DIV
6060 W BRISTOL RD
FLINT
MI
48554
810-635-3430
72582
MTU DETROIT DIESEL INC
DBA FOREIGN PARENT IS MTU
13400 W OUTER DR
DETROIT
MI
48239
313-592-5826
95201
NAPCO INTERNATIONAL LLC
11055 EXCELSIOR BLVD
HOPKINS
MN
55343
952-931-2490
Reference Numbers (Part Numbers)
1914646
1914646
1914646
1914646
1914646
5A10251
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
CELLULOSE OVERALL
0.516 INCHES NOMINAL
1 ROUND
1.188 INCHES NOMINAL
1 ROUND;