National Item Identification Number
00-022-1432
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
11871
C7432
POWER COMPONENTS DEUTSCHLAND GMBH
2247
BURSCHEID
GERMANY
02174-765325
72582
MTU DETROIT DIESEL INC
DBA FOREIGN PARENT IS MTU
13400 W OUTER DR
DETROIT
MI
48239
313-592-5826
24617
72582
MTU DETROIT DIESEL INC
DBA FOREIGN PARENT IS MTU
13400 W OUTER DR
DETROIT
MI
48239
313-592-5826
Reference Numbers (Part Numbers)
CAV10-64P
PC0120391
0120391
221432
221432
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE TREATMENT
HOLE DIAMETER
Required Description
STEEL CORROSION RESISTING OVERALL
MIL-S-854 MIL SPEC SINGLE MATERIAL RESPONSE O