National Item Identification Number
00-262-8353
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Referenced on: http://constructioncranes.tpub.com//TM-5-3810-288-20P/TM-5-3810-288-20P0134.htm
Referenced on: http://constructioncranes.tpub.com//TM-5-3810-288-20P/TM-5-3810-288-20P0490.htm
Referenced on: http://constructioncranes.tpub.com//TM-5-3810-288-20P/TM-5-3810-288-20P0522.htm
Referenced on: http://constructioncranes.tpub.com//TM-5-3810-288-34P/TM-5-3810-288-34P0227.htm
Referenced on: http://constructioncranes.tpub.com//TM-5-3810-288-34P/TM-5-3810-288-34P0779.htm
Referenced on: http://constructioncranes.tpub.com//TM-5-3810-288-34P/TM-5-3810-288-34P0854.htm
Referenced on: http://firetrucksandequipment.tpub.com//TM-5-4210-213-24P/TM-5-4210-213-24P0109.htm
Referenced on: http://firetrucksandequipment.tpub.com//TM-5-4210-213-24P/TM-5-4210-213-24P0142.htmDescription
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
26840
HALE PRODUCTS INC
700 SPRING MILL AVE
CONSHOHOCKEN
PA
19428
352-387-0416
74165
PHILADELPHIA GASKET MFG CO INC
3916 FRANKFORD AVE
PHILADELPHIA
PA
19124
215-743-8100
19207
64104
DRESSER INC
WAUKESHA ENGINE DIV
15455 DALLAS PKY NO 1100
ADDISON
TX
75001
262-549-2834
NSN (National Stock Number) 5310-00-262-8353, 5310002628353 NIIN (National Identification Number) 00-262-8353, 002628353
Part Numbers (Reference Numbers)
FF-W-92 TYPE A,CLASS F
FF-W-92B
F396
F396
5334705
78265
Required Categories
MATERIAL
HOLE DIAMETER
PERIPHERAL SHAPE STYLE
OVERALL DIAMETER
CENTER HOLE S
Required Description
COPPER OVERALL
0.443 INCHES MINIMUM AND
0.463 INCHES MAXIMUM
1 ROUND
0.615 I