National Item Identification Number
00-244-2433
National Stock Number
Item Name
WASHER,FLAT
Federal Supply Class
5310
Description
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Commercial and Government Entity Code (Supplier Data)
00742
AIR PRODUCTS AND CHEMICALS INC.
DBA AIR PRODUCTS
7201 HAMILTON BLVD
ALLENTOWN
PA
18195
610-481-6333
11976
CHICAGO PNEUMATIC TOOL CO
1800 OVERVIEW DR
ROCK HILL
SC
29730
803-817-7000
00742
AIR PRODUCTS AND CHEMICALS INC.
DBA AIR PRODUCTS
7201 HAMILTON BLVD
ALLENTOWN
PA
18195
610-481-6333
Reference Numbers (Part Numbers)
9-12157
9-12157
9-12157
9-372-01-0334
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
HARDNESS RATING
HOLE DIAMETER;
Required Description
COPPER ALLOY OVERALL
QQ-C-576 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
65.0 R