National Item Identification Number
00-454-8901
004548901
3040-00-454-8901
3040004548901
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
62983
Reference Numbers (Part Numbers)
353114
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END SPLINE LENGTH
FIRST EN
Required Description
COPPER
18 SPLINED
0.8645 INCHES NOMINAL
0.7750 INCHES MINIMUM AND
0.7810 INC