National Item Identification Number
00-430-4207
004304207
3040-00-430-4207
3040004304207
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-233-23P/TM-5-2410-233-23P0771.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-233-23P/TM-5-2410-233-23P0938.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-237-24P/css/TM-5-2410-237-24P_476.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-237-24P/css/TM-5-2410-237-24P_617.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2410-237-24P/css/TM-5-2410-237-24P_657.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
11083
NSN (National Stock Number) 3040-00-430-4207, 3040004304207 NIIN (National Identification Number) 00-430-4207, 004304207
Part Numbers (Reference Numbers)
9S5265
Required Categories
MATERIAL
LARGEST STEP DIAMETER
OVERALL LENGTH
THE MANUFACTURERS DATA
MANUFAC
Required Description
STEEL
2.228 INCHES NOMINAL
13.888 INCHES NOMINAL
11083
9S5265