National Item Identification Number
00-369-3672
003693672
3040-00-369-3672
3040003693672
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
28873
HOBART CORPORATION
DBA VULCAN HART DIVISION
701 S RIDGE AVE WORLD HEADQUARTERS
TROY
OH
45374
937-332-7143
28873
HOBART CORPORATION
DBA VULCAN HART DIVISION
701 S RIDGE AVE WORLD HEADQUARTERS
TROY
OH
45374
937-332-7143
28873
HOBART CORPORATION
DBA VULCAN HART DIVISION
701 S RIDGE AVE WORLD HEADQUARTERS
TROY
OH
45374
937-332-7143
28873
HOBART CORPORATION
DBA VULCAN HART DIVISION
701 S RIDGE AVE WORLD HEADQUARTERS
TROY
OH
45374
937-332-7143
28873
HOBART CORPORATION
DBA VULCAN HART DIVISION
701 S RIDGE AVE WORLD HEADQUARTERS
TROY
OH
45374
937-332-7143
28873
HOBART CORPORATION
DBA VULCAN HART DIVISION
701 S RIDGE AVE WORLD HEADQUARTERS
TROY
OH
45374
937-332-7143
Reference Numbers (Part Numbers)
M-12717
12937
17482
1769XDMPC67
1770XDMPC65
291236
Required Categories
MATERIAL
III END ITEM IDENTIFICATION
Required Description
STEEL
HOBART MIXING MACHINE MODELS A-120,A-120T,AND A-200T