National Item Identification Number
00-323-0661
003230661
3040-00-323-0661
3040003230661
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
17472
Reference Numbers (Part Numbers)
B6215
B6215
Required Categories
MATERIAL
SURFACE FINISH
FIRST END STYLE
FIRST END DIAMETER
FIRST END INTERNA
Required Description
STEEL
125.0 MICROINCHES
9 INTERNAL THREADED
0.4880 INCHES NOMINAL
0.3750 INC