National Item Identification Number
01-525-1900
015251900
3040-01-525-1900
3040015251900
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
63050
WHITE HYDRAULICS INC
BILL BRYAN BLVD
1127
HOPKINSVILLE
KY
42240
270-885-1110
63050
WHITE HYDRAULICS INC
BILL BRYAN BLVD
1127
HOPKINSVILLE
KY
42240
270-885-1110
Reference Numbers (Part Numbers)
300110052
300200A7502AAAAB ITEM 27
Required Categories
III END ITEM IDENTIFICATION
Required Description
MOTOR, HYDRAULIC