National Item Identification Number
01-525-0166
015250166
3040-01-525-0166
3040015250166
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
60848
ALLIED SYSTEMS COMPANY INC
DBA ALLIED MARINE CRANE DIVISION
21433 SW OREGON STREET
SHERWOOD
OR
97140
503-625-2560
0URD7
LINDE HYDRAULICS CORPORATION
5089 W WESTERN RESERVE RD
CANFIELD
OH
44406
330-533-6801
0URD7
LINDE HYDRAULICS CORPORATION
5089 W WESTERN RESERVE RD
CANFIELD
OH
44406
330-533-6801
Reference Numbers (Part Numbers)
FIG 7-35 ITEM 7
2453230102
2453230104
Required Categories
III PART NAME ASSIGNED BY CONTROLLING AGENCY
Required Description
DRIVE SHAFT