National Item Identification Number
01-522-7819
015227819
3040-01-522-7819
3040015227819
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://www.tpub.com/content/semis/TM-9-2330-331-14-P/TM-9-2330-331-14-P0383.htm
Referenced on: http://www.tpub.com/content/semis/TM-9-2330-331-14-P/TM-9-2330-331-14-P0420.htm
Referenced on: http://www.tpub.com/content/semis/TM-9-2330-331-14-P/TM-9-2330-331-14-P0427.htm
Referenced on: http://www.tpub.com/content/semis/TM-9-2330-331-14-P/TM-9-2330-331-14-P0433.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
18634
TALBERT MANUFACTURING INC
1628 W STATE ROAD 114
RENSSELAER
IN
47978
219-866-7141
Reference Numbers (Part Numbers)
M872A4C13005
Required Categories
SPECIAL FEATURES
III END ITEM IDENTIFICATION
III PART NAME ASSIGNED BY CONTROL
Required Description
NHA: FLIP UP CONTAINER GUIDE INSTALLATION ASSEMBLY
TRAILER, FLAT BED, 2330-01-4