National Item Identification Number
01-498-2256
014982256
3040-01-498-2256
3040014982256
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-312-24P/TM-9-2320-312-24P0127.htm
Referenced on: http://constructiontractors.tpub.com//TM-9-2320-312-24P/TM-9-2320-312-24P0322.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
03533
CRANE CARRIER COMPANY
SUB OF CCI CORP
1925 N SHERIDAN RD
TULSA
OK
74115
918-836-1651
Reference Numbers (Part Numbers)
6-40-521
Required Categories
SPECIAL FEATURES
III END ITEM IDENTIFICATION
III PART NAME ASSIGNED BY CONTROL
Required Description
NEXT HIGHER ASSEMBLY: PROPSHAFT ASSEMBLY P/N 260C
THIS IS ONLY A SUB-PART OF TH