National Item Identification Number
01-440-9087
014409087
3040-01-440-9087
3040014409087
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
60938
COLUMBUS MCKINNON CORP
CM CHAIN DIV
AUDUBON AND SYLVAN PKYS
AMHERST
NY
14228
716-689-5400
Reference Numbers (Part Numbers)
22821-622-10
Required Categories
III END ITEM IDENTIFICATION
Required Description
COLUMBUS MCKINNON SERIES 622 HAND HOIST