National Item Identification Number
01-422-0461
014220461
3040-01-422-0461
3040014220461
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
D9524
MAN B & W DIESEL AG
STADTBACHSTRASSE 1
AUGSBURG
86153
GERMANY
0821-322-0
D9524
MAN B & W DIESEL AG
STADTBACHSTRASSE 1
AUGSBURG
86153
GERMANY
0821-322-0
D9524
MAN B & W DIESEL AG
STADTBACHSTRASSE 1
AUGSBURG
86153
GERMANY
0821-322-0
0FF23
MAN B&W DIESEL INC
17 STATE ST FL18
NEW YORK
NY
10004
212-269-0980
Reference Numbers (Part Numbers)
TM D365645-3EPG 500.02/10
TM D365645-3EPG 500.02/23
520.126
520.126
Required Categories
III END ITEM IDENTIFICATION
III SUPPLEMENTARY FEATURES
Required Description
TURBINE ROTOR,TURBOSUPERCHARGER,DIESEL ENGINE
SHAFT MAGNETIC