National Item Identification Number
01-371-7751
013717751
3040-01-371-7751
3040013717751
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
78062
78062
Reference Numbers (Part Numbers)
20775-001 FIND 38
20775-1040
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
Required Description
STEEL CORROSION RESISTING
ASTM A582,CL 416 COND T ASSN STD SINGLE MATERIAL RESP