National Item Identification Number
01-315-7647
013157647
3040-01-315-7647
3040013157647
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
S4599
KONE OYJ HYVINKAAN TEHTAAT
KUUMOLANKATU 1
670
HYVINKAA
FIN-05801
FINLAND
358204751
64261
R M MATERIALS HANDLING INC
4501 GATEWAY BLVD
SPRINGFIELD
OH
45502
937-328-5100
S4599
KONE OYJ HYVINKAAN TEHTAAT
KUUMOLANKATU 1
670
HYVINKAA
FIN-05801
FINLAND
358204751
Reference Numbers (Part Numbers)
KHV218-OP51
KHV218-OP51
KHV218X11A-24 ITEM 34
Required Categories
OVERALL LENGTH
Required Description
320.0 MILLIMETERS NOMINAL