National Item Identification Number
00-153-2161
001532161
3040-00-153-2161
3040001532161
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
Reference Numbers (Part Numbers)
441391PC2
Required Categories
III END ITEM IDENTIFICATION
Required Description
GUNS 30-75MM