National Item Identification Number
00-150-7157
001507157
3040-00-150-7157
3040001507157
National Stock Number
Item Name
SHAFT,STRAIGHT
Federal Supply Class
3040
Description
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Commercial and Government Entity Code (Supplier Data)
58880
Reference Numbers (Part Numbers)
40-373-218
Required Categories
MATERIAL
FIRST END STYLE
FIRST END GROOVE WIDTH
FIRST END GROOVE DIAMETER
FI
Required Description
STEEL
5 CIRCULAR GROOVED
0.0120 INCHES MINIMUM AND
0.0140 INCHES MAXIMUM
0.0