National Item Identification Number
01-257-4921
012574921
3040-01-257-4921
3040012574921
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-224-24P-1/css/TM-5-2420-224-24P-1_134.htm
Referenced on: http://constructiontractors.tpub.com//TM-5-2420-224-24P-1/css/TM-5-2420-224-24P-1_828.htmDescription
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
D8015
BOSCH ROBERT GMBH
GESCHAEFTSBEREICH KH
41 09 60
KARLSRUHE
GERMANY
0721-942-2254
D8046
DAIMLERCHRYSLER AG
ABT GSP/TIC HPC R823
STUTTGART
GERMANY
0711-17-83114
64678
Reference Numbers (Part Numbers)
1 416 026 005
1 416 026 005
1 416 026 005
Required Categories
FIRST END STYLE
END SIMILARITY
III END ITEM IDENTIFICATION
Required Description
4 FLATTED
IDENTICAL
2420-01-160-2754