National Item Identification Number
01-236-1261
012361261
3040-01-236-1261
3040012361261
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
09608
MARCO SEATTLE INC
DBA MARCO
2300 W COMMODORE WAY
SEATTLE
WA
98199
206-285-3200
09608
MARCO SEATTLE INC
DBA MARCO
2300 W COMMODORE WAY
SEATTLE
WA
98199
206-285-3200
Reference Numbers (Part Numbers)
61683
83185
Required Categories
Required Description