National Item Identification Number
01-170-8920
011708920
3040-01-170-8920
3040011708920
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
17590
DIAMOND POWER INTL INC
2600 E MAIN ST
415
LANCASTER
OH
43130
740-687-4138
Reference Numbers (Part Numbers)
907806-0023
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END HOLE DIAMETER
FIRST EN
Required Description
STEEL
23 UNTHREADED CROSS DRILLED
0.6200 INCHES NOMINAL
0.1250 INCHES NOMINAL