National Item Identification Number
01-163-8376
011638376
3040-01-163-8376
3040011638376
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
54418
Reference Numbers (Part Numbers)
460893
Required Categories
OVERALL LENGTH
III END ITEM IDENTIFICATION
THE MANUFACTURERS DATA
MANUFACTURE
Required Description
10.718 INCHES NOMINAL
ADP E-4B
54418
460893