National Item Identification Number
01-160-5805
011605805
3040-01-160-5805
3040011605805
National Stock Number
Item Name
SHAFT,STRAIGHT
Federal Supply Class
3040
Description
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
Commercial and Government Entity Code (Supplier Data)
53711
53711
96169
96169
Reference Numbers (Part Numbers)
709-4684916
709-4684916 ITEM 36
87832-1645
87832-1645 ITEM 36
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE FINISH
FIRST END STYLE;
Required Description
STEEL COMP 304
QQ-S-763,COND B FED SPEC SINGLE MATERIAL RESPONSE
63.0 MICROINC