National Item Identification Number
01-124-5215
011245215
3040-01-124-5215
3040011245215
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
19207
Reference Numbers (Part Numbers)
11629002
Required Categories
MATERIAL
FIRST END STYLE
FIRST END GROOVE WIDTH
FIRST END DISTANCE FROM END T
Required Description
STEEL COMP 8620H
5 CIRCULAR GROOVED
0.0500 INCHES NOMINAL
0.120 INCHES NOMINA