National Item Identification Number
00-979-7841
009797841
3040-00-979-7841
3040009797841
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
Reference Numbers (Part Numbers)
AD8400-305
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
SURFACE FINISH
FIRST END STYLE;
Required Description
STEEL
SAE 1137 TO 1141 ASSN STD SINGLE MATERIAL RESPONSE
32.0 MICROINCHES
3 F