National Item Identification Number
00-563-5316
005635316
3040-00-563-5316
3040005635316
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
3040
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
19207
24617
19315
HONEYWELL INTL INC DEFENSE AVIONICS
SYSTEMS FORMER BENDIX NAVIGATION AND
699 US HWY 46
TETERBORO
NJ
07608
201-393-3924
99551
Reference Numbers (Part Numbers)
A162654
1887687
1887687
21606
21606
Required Categories
MATERIAL
FIRST END STYLE
FIRST END DIAMETER
FIRST END HOLE DIAMETER
FIRST EN
Required Description
STEEL
25 CROSS DRILLED AND EXTERNALLY THREADED
0.5900 INCHES MINIMUM AND
0.59