National Item Identification Number
01-210-4914
012104914
2530-01-210-4914
2530012104914
National Stock Number
Item Name
SHAFT,SHOULDERED
Federal Supply Class
2530
Description
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Commercial and Government Entity Code (Supplier Data)
Parts Hangar
partshangar.com
9438 US Hwy 19 N. #311
Port Richey, FL 34668
Ph. (727) 619-7700
Fax. (727) 255-5042
Click here to submit an RFQ (Request For Quote)
97403
CECOM LR CENTER
OPNS CENTER SITCO USASA MDW
10115 GRIDLEY RD SUITE 228
FORT BELVOIR
VA
22060
Reference Numbers (Part Numbers)
13222E0169
Required Categories
Required Description