LO 5-3895-373-12
Note 20 (Continued)
ANNUAL or 1000 HOURS
D
Remove straight adapter (2) and preformed
packing (4). Discard preformed packing.
E
Remove breather (5) and flat washer (6).
Discard flat washer.
F
Remove drain plug (7) and flat washer (8).
Discard flat washer. Drain gear oil into drain
pan.
Discard oil in accordance with local
procedures.
WARNING
Cleaning solvent, P-D-680, Type ill, is
TOXIC and flammable.
Wear
protective goggles and gloves. Use
only in a well ventilated area. Avoid
contact with skin, eyes, and clothes,
and do not breathe vapors. Keep
away from heat or flame.
Never
smoke when using solvent; the
flashpoint for Type III cleaning
solvent is 200F (93,3C). Failure to
do so may result in injury or death to
personnel.
G
Clean straight adapt er (2), breather (5), and
drain plug (7) with a cleaning cloth and cleaning
solvent.
CAUTION
CAUTION
Be careful not to overtighten drain
plug (7). Overtightening will cause
Be careful not to overtighten breather
stripping of brass screw threads or
(5).
Overtightening will cause
shearing of adapter.
stripping of brass screw threads or
shearing of adapter.
H
Install and tighten drain plug (7) and flat washer
(8).
J
Install and tighten breather (5) and flat washer
(6).
I
Add oil to the speed reduction gearbox (9) until
oil level is seen halfway in the oil sight indicator
(10).
Card 23 of 28