[ Back ] [ Home ] [ Up ] [ Next ]

ANSWERS TO QUESTIONS Q1. THROUGH Q18.

A1. Conventional pentodes have a staggered grid arrangement, while power pentodes have a shielded grid arrangement.
A2. Beam-forming plates.
A3. By increasing the number of electrons that reach the plate, plate current is increased.
A4. A large negative voltage causes conduction to occur only at the center of the grid Decreases gain.
A5. Power pentode or beam-forming tetrode. Conventional tube. Variable-mu tube.
A6. It causes the control grid to short to the cathode.
A7. By reducing the spacing between tube elements.
A8. The close spacing of tube elements allows for the ready formation of arcs or short circuits.
A9. Planar
A10. They can carry more current. They maintain a constant IR drop across the tube.
A11. None.
A12. The filament's voltage should be applied to the tube at least 30 seconds before attempting to operate the tube.
A13. They have the ability to maintain a constant voltage drop across the tube despite changes in current flow.
A14. To visually display electronic signals.
A15. Electrongun. Deflection system Screen.
A16. Persistence.
A17. The horizontal-deflection plate.
A18. The vertical-deflection plate.