TM 5-4320-302-14
6-14.
DRIVE SHAFT (CONT)
Location/Item
Action
Remarks
INSTALLATION/REPLACEMENT
NOTE
Make sure markings on camshaft gear and crankshaft gear are alined.
16. Crankshaft gear
Install gear on crankshaft with hex bolts. Tighten bolts alternately and evenly to 22.13 ft
lb (30 N.m) torque. Using torque gage, tighten bolts two additional 30 degree
increments.
17. Large spacer
Install with screws. Tighten screws securely.
ring and
carrier plate
6-93