TM 5-4320-302-14
5-22.
BOTTOM COVER (CONT)
Location/Item
Action
Remarks
WARNING
Make sure that hoists and other lifting equipment are in
good repair and of sufficient capacity to safely handle
loads without injury to personnel or damage to
equipment. Securely attach lifting equipment to engine
assembly. Before lifting, be sure load is balanced.
CAUTION
Engine damage will occur if engine is set on bottom
cover. Provide adequate blocking to support engine
after removal from skid assembly.
2.
Engine
Position a suitable lifting device equipped with
Spread slings on
assembly
a spreader bar and slings over engine assembly.
spreader bar so that
Attach slings to lifting bracket and around engine
slings hang vertically
assembly. Put tension on slings. With the
when attached to
engine properly supported, lift engine and turn
engine assembly.
it over onto its exhaust (rear) side.
5-101