TM 5-4320-300-14
5-16.
ENGINE ASSEMBLY (CONT)
Location/Item
Action
Remarks
17. Bearing
Remove mounting nuts and lockwashers securing
housing
bearing housing to flywheel housing. Loosen,
but do not remove, set screw in bored hub.
WARNING
Make sure that hoists and other lifting equipment are in good repair and of sufficient capacity to
safely handle loads without injury to personnel or damage to equipment. Securely attach lifting
equipment to engine assembly. Before lifting, be sure load is balanced.
CAUTION
Engine damage will occur if engine is set on oil pan. Provide adequate blocking to support engine
after removal from frame assembly.
5-60