STEP/SEQUENCE
RESULT
WHAT TO DO NEXT
TM 9-2320-363-20-1
Section 4
TROUBLESHOOTING CHARTS
E. ENGSV - ENGINE HARNESS +5 VOLTS SUPPLY (CONTD)
ENG5V-30 Verify Repairs
Turn ignition OFF.
(No codes).
Repairs are complete.
Reconnect all connectors.
Reconnect fuses (or Circuit
Codes which
All system diagnostics are
breakers) if previously
brought you to Chart
complete. Please review this
disconnected.
ENG5V are still there.
section from the first step to find
the error.
Turn ignition ON.
Clear codes.
If "Check engine" Light does not
Any codes except
Go to START-1, pg 3-345.41, to
stay on, start engine and run for
those which brought
service other codes.
1 minute or until "CHECK
you to Chart ENG5V.
ENGINE' light comes on.
Stop engine.
Read INACTIVE CODES.
Change 3 3-345.417