Window and Window Regulator Installation-cont.

TM 9-2320-365-20-4 WARNING Use care when installing window. Do not force window, or window may shatter. Failure to comply may result in injury to personnel. NOTE Steps (6) and (7) require the aid of an assistant. (6) Position window (7) in door (2). (7) Support window (7) and install two washers (8) and screws (9) in window regulator (1). (8) Lower window (7) until completely down. (8.1) Position two lower window channels (9.1) over window (7) from inside of door (2). (8.2) Install two lower window channels (9.1) in door (2) with four screws (9.2). (8.3) Tighten four screws (9.2) to 10-14 lb-in. (1-2 N·m). NOTE • Use a solution of soap and water to ease installation of rubber sealing strips. • It may be necessary to roll window up and down during installation of rubber sealing strips. (8.4) Install rubber sealing strips (9.3) in two lower window channels (9.1). Change 1 16-42.1/(16-42.2 Blank)