Window and Window Regulator Installation-cont.

TM 9-2320-365-20-4 16-5. DOOR REPAIR/ADJUSTMENT (ALL MODELS EXCEPT M1081) (CONT) (10) Position window channel (11) over window (8) from inside of door (4). (11) Install window channel (11) on upper door frame (12) with six rivets (13). (12) Raise window (8) for access to bottom of window channel (11). (13) Position two screws (14) in bottom of window channel (11). (13.1) Tighten two screws (14) to 10-14 lb-in. (1-2 N·m). (14) Lower window (8) until completely down. NOTE • Use a solution of soap and water to ease installation of rubber sealing strip. • It may be necessary to roll window up and down during installation of rubber sealing strip. (15) Install rubber sealing strip (15) around upper portion of window channel (11). 16-22 Change 1