TM 5-5420-234-14&P
4-12. UNIT TROUBLESHOOTING (continued).
18. BAP WINCH DOES NOT WIND OUT (continued).
4.
KNOWN INFO
TEST OPTIONS
Error Code, EC 06 and/
or EC 17.
the remote control con-
Winch inoperative at both
nector (J9), between
REASON FOR QUESTION
remote locations.
positions "L" and "E" and
To verify the operation of
No power at main
"L" and "C", with the
the remote control unit.
junction box terminal
WINCH switch in the OUT
If there is an open circuit
strip.
position?
between either of the two
POSSIBLE PROBLEMS
test points, the remote
control unit is faulty.
Remote control faulty.
Remote control cable
faulty.
Repair remote control
NO
YES
4-394
Change 1